> Model DN-50W
The DN-50W have designed specifically to operate with strain gauge sensors such as Fast - measurement of Load cell, Pressure Transducer, LVDT, etc.
The setup sequence is simple and quick using four push buttons only. And comparison output are available.
Sampling speed : Appr. 1000Times Per Second
Standard Analog output : 0~±10V, 4~20mA, 0~20mA
Specifications | Accuracy |
Application sensor | Strain gauge sensor (350Ω or 700Ω) |
Sensor authorized voltage (the number of Loadcell connection) Zero adjustment range Input signal AD converter DA converter Display Display speed Character height Decimal point Sampling speed Zero variation Sensitivity variation Voltage output Usage temperature range Humidity Power source used Relay output | DC 5V, Loadcell(350Ω) available 4 100% F ·S (Auto Zero) 0.5 ~ 3.0mV/V 24bit (Max. 1000 times/sec) 16bit (1000 times/sec) -19999 ~ +99999 Appox 32times/sec 7 Segment 14mm Random setting available Max 1000 times/sec ±10 ppm/℃ ±10 ppm/℃ DC 0 ~ ±10V or 4~20mA -10℃ to 60℃ Less than 80% RH (no dew condensation) AC 85 ~ 240V 50/60Hz Contact capacity : AC 250V 5A Relay life time : more than 5,000,000 times |
Dimension & Weight | 96×48×128mm, About 500g |
■Feature
High resolution (24bit ADC, 16bit DAC)
High precision (more than 0.01% F.S) and stability
Quick sampling speed (1000times/sec)
Relay output : Hi, Low, NG, OK.
Unit conversion : kg, N, ℓb, kg/㎠, bar, MPa
Display part and analogue zero by auto zero (DAC)
Modbus RTU Protocol
Peak & sample hold
Watch dog
■Option
OP-01 : BCD paralle out
OP-02 : RS232C serial interface (Standard installed)
OP-03 : RS485 Multi drop interface
OP-10 : Power 24VDC
OP-14 : Input signal 5mV/V
OP-15 : Input signal 10mV/V
